How to Fix Not Working Issue?

151 is the default web address for Netgear extenders. Using mywifiext, you can not only configure your extender but also tweak various settings of your device in a hassle-free manner. But, what if mywifiext itself becomes a problem for you? Yes, you read it right! Many Netgear users approach us to know the solution of not working problem. If you are also struggling with the same, here are the troubleshooting tips that will help you fix not working issue in a jiffy. So, without any ado, have a roundup of tips given below and make the most of your device.

Why Not Working? 

Before you get to know about how to fix not working issue, let’s first make you aware of the common reasons that can be the culprit behind the problem. Here they are:

  • Technical glitches 
  • Faulty wired connections 
  • Improper power access 
  • Typos in the web address 
  • Outdated web browser 
  • Closeness of WiFi interfering devices 
  • Partial extender setup

Knowing the reasons, you can now fix the not working issue with ease. 

How to Troubleshoot Not Working Issue?

  1. Power Cycle Your Extender: Very first hack you can try is to power cycle your extender by unplugging its power cable from its power socket and plugging it back in after some time. This process helps in fixing various technical glitches in the software as well as the hardware of your device. Once done with the power cycle process, try accessing mywifiext and see if it works for you. 
  2. Cross-check wired connections: You may also run into not working issue if the cable connecting your router and extender is worn out or damaged. If that is the case, either replace the cable with a new one or consider connecting your devices wirelessly.
  3. Check Power Supply: Another reason that can stop you from accessing could be related to the improper power supply. Thus, check the power socket into which you have plugged your extender and ensure that it is offering adequate and fluctuation-free power.
  4. Make Use of Correct Web Address: Are you sure you have used the correct web address for accessing the Netgear Genie setup wizard? No? Well, cross-check it now! Perhaps, there is some typing mistake in the URL you have entered for accessing the login page of your extender. Also, if you are using an iOS device to reach the dashboard of your device, you are advised to use mywifiext.local as the default web address.
  5. Update Your Web Browser: mywifiext will not work if the web browser that is being used by you for executing the process is outdated. Therefore, update your web browser to the latest version or switch to the one that is already updated. Along with that, it would be better if you can clear cache and cookies from your web browser to avoid any further browser-related issues. 
  6. Keep WiFi Interference at Bay: If you have placed your router and extender near devices emitting radio waves, then also you may face issues while accessing So, keep such devices at bay. To name a few, you can place your router an extender far from baby monitors, Bluetooth speakers, refrigerators, microwave ovens, cellular phones, etc.
  7. Reset and Reconfigure Your Extender: Lastly, the faulty or impartial setup of your device can make you experience not working issue. To rid yourself of the issue, consider resetting your device to the default settings. Once done with the reset process, perform Netgear extender setup from scratch and again try accessing

This is how you can fix the not working issue. With that, this how-to guide comes to an end. If you need any more assistance with any other extender-related issue, let us know your query in the comments section.


Please enter your comment!
Please enter your name here